Konica Minolta bizhub C754 User Manual page 152

10.1 Configuring the Internet fax environment
Settings
[Binary Division]
[Divided Mail Size]
5
In the administrator mode, select [Network] - [E-mail Setting] - [E-mail RX (POP)], and configure the fol-
lowing settings.
Settings
[E-mail RX Setting]
[POP Server Address]
[Login Name]
[Password]
[Connection Timeout]
[Port Number]
bizhub C754/C654
Description
Select this check box to divide an E-mail. The E-mail is divided according
to the size specified at [Divided Mail Size]. This item is necessary if you oc-
casionally send E-mails exceeding the maximum size specified on the E-
mail server side.
To read a divided E-mail, the mail soft receiving E-mails must have a func-
tion to restore the divided E-mail. The mail soft without the restore function
may not read the divided E-mail.
[OFF] (not selected) is specified by default.
Enter the size to divide an E-mail. This item is necessary when [Binary Di-
vision] is enabled.
Description
Select [ON] to use Internet fax.
[ON] is specified by default.
Enter the address of your E-mail server (POP).
Use one of the following formats.
• Example of host name entry: "host.example.com"
• Example of IP address (IPv4) entry: "192.168.1.1"
• Example of IP address (IPv6) entry: "fe80::220:6bff:fe10:2f16"
Enter the login name when receiving E-mails using the E-mail server (POP)
(using up to 63 characters).
Enter the password of the user name you entered into [Login Name] (using
up to 15 characters).
To enter (change) the password, select the [Password is changed.] check
box, then enter a new password.
Change the timeout period for a communication with the E-mail server
(POP) as required.
[30] sec. is specified by default.
If necessary, change the port number of the E-mail server (POP).
Normally, you can use the original port number.
[110] is specified by default.
10
10-6