12.5
Employing the NTLM authentication
Using the WINS server
If the WINS server is installed to resolve the name, set the WINS server address and the name resolution
method.
In the administrator mode, select [Network] - [SMB Setting] - [WINS Setting], then configure the following set-
tings.
Settings
[WINS]
[Auto Obtain Setting]
[WINS Server
Address1]/[WINS Server
Address2]
[Node Type Setting]
bizhub C754/C654
Description
Select [ON] to use the WINS server.
[ON] is specified by default.
Select [Enable] to automatically obtain the WINS server address.
This item is necessary when DHCP is enabled.
[Enable] is specified by default.
Enter the WINS server address.
This item is necessary when you do not automatically obtain the WINS
server address using the DHCP.
Use the following entry formats.
•
Example of entry: "192.168.1.1"
Select the name resolution method.
•
[B Node]: Query by broadcast
•
[P Node]: Query the WINS server
•
[M Node]: Query by broadcast, and then query the WINS server
•
[H Node]: Query the WINS server, and then query by broadcast
[H Node] is specified by default.
12
12-22