Specifying The Time-Out Time By Interface - Konica Minolta bizhub C754 User Manual
Bizhub c654/c754 web management tool user guide
Hide thumbs
Also See for bizhub C754:
- User manual (482 pages) ,
- Quick start manual (130 pages) ,
- Shortcut manual (33 pages)
Table of Contents
Advertisement
8.11
Specifying the time-out time by interface
8.11
Specifying the time-out time by interface
Change the time-out time to limit a communication between this machine and the computer if necessary. You
can change the time-out time to limit communications via a network and USB respectively.
In the administrator mode, select [Print Setting] - [Interface Setting], then configure the following settings.
Settings
[Network Timeout]
[USB Timeout]
bizhub C754/C654
Description
When this machine is connected via a network to the computer, change
the communication time-out time if necessary.
[60] sec. is specified by default.
When this machine is connected via a USB device to the computer, change
the communication time-out time if necessary.
[60] sec. is specified by default.
8
8-33
- Quick Links:
- Restarting the Network Interface
Hide quick links:
Advertisement
Table of Contents
