Using Ssl Communication - Konica Minolta bizhub C754 User Manual

12.19 Using the authentication unit

Using SSL communication

Communication between this machine and the LDAP server is encrypted with SSL.
Configure the setting if your environment requires SSL encryption communication with the LDAP server.
In the administrator mode, select [User Auth/Account Track] - [LDAP-IC Card Authentication Setting] - [Server
Registration] - [Edit], then configure the following settings.
Settings
[Enable SSL]
[Port No. (SSL)]
[Certificate Verification
Level Settings]
[Expiration Date]
[CN]
[Key Usage]
[Chain]
bizhub C754/C654
Description
Select this check box to use SSL communication.
[OFF] (not selected) is specified by default.
If necessary, change the SSL communication port number.
Normally, you can use the original port number.
[636] is specified by default.
To verify the certificate, select items to be verified.
If you select [Confirm] at each item, the certificate is verified for each item.
Confirm whether the certificate is still valid.
[Confirm] is specified by default.
Confirm whether CN (Common Name) of the certificate matches the server
address.
[Do Not Confirm] is specified by default.
Confirm whether the certificate is used according to the intended purpose
approved by the certificate issuer.
[Do Not Confirm] is specified by default.
Confirm whether there is a problem in the certificate chain (certificate path).
The chain is validated by referencing the external certificates managed on
this machine.
[Do Not Confirm] is specified by default.
12
12-67