Registering An Ip Address Fax Program - Konica Minolta bizhub C754 User Manual

15.3 Registering a program
In the administrator mode, select [Store Address] - [Program] - [Registration] - [Internet Fax], then click [OK]
to configure the following settings.
Settings
[Name]
[Destination Information]
[Basic Setting]/[Application
Setting]
[Limiting Access to Desti-
nations]
15.3.8

Registering an IP address fax program

A program can be registered or edited using Web Connection. Although character input is a difficult process
using the Touch Panel, it can be carried out easily if you use the computer.
A combination of address information and the fax/scan transmission option settings can be registered in a
program.
The following describes the IP address fax program.
bizhub C754/C654
Description
Enter the program name (using up to 24 characters).
Assign a name that helps you easily identify the program.
Click [Search from List], and select a destination Internet fax address from
the list. Click [Check Destination] to check registered address books.
If you wish to manually enter a destination Internet fax, select [Direct Input]
and enter the FTP.
• [E-mail Address]: Enters the destination E-mail address.
• [Fax Resolution]/[Paper Size ]/[Compression Type]: Select the specifi-
cations of original data that the recipient machine can receive.
Only one destination can be specified.
Configure the Scan option settings.
For details, refer to page 15-22.
Limit access to this destination, if necessary.
For details, refer to page 12-44.
15
15-19