Configuring Basic Fax Settings; Configuring The Line Usage Settings - Konica Minolta bizhub C754 User Manual

9.1

Configuring basic fax settings

9 Configuring the Fax Environment
9.1 Configuring basic fax settings
9.1.1

Configuring the line usage settings

Configure the settings such as the telephone line type (dialing method) and fax receiving mode.
In the administrator mode, select [Fax Settings] - [Line Parameter Setting], then configure the following set-
tings.
Settings
[Dialing Method]
[Receive Mode]
[Number of RX Call Rings]
[Number of Redials]
[Redial Interval]
[Line Monitor Sound]
[Line Monitor Sound Vol-
ume (Send)]
bizhub C754/C654
Description
Select the line type according to your environment.
Select a receive mode.
• [Auto RX]: Automatically start receiving a fax if the call is a fax call.
• [Manual RX]: Manually request the reception of a fax. Select this mode
if a phone is connected to this machine and you expect frequent voice
calls.
[Auto RX] is specified by default.
If necessary, change the number of times the phone rings before automat-
ically receiving a fax.
[2 x] is specified by default.
If the machine fails to send a fax successfully, it automatically redials the
same destination after a certain period of time has elapsed. If necessary,
change the number of redials.
(The setting range varies according to the local standards.)
If necessary, change the redial intervals when you specified a value in
[Number of Redials].
[3 min.] minutes is specified by default.
Select whether to play sounds on the telephone line from speakers during
fax communication.
[OFF] is specified by default.
If necessary, adjust the volume of speakers when sending a fax if [Line
Monitor Sound] is set to [ON].
[10] is specified by default.
9
9-2