Configuring The Ip Address Fax Environment; Overview; Configuring Basic Settings For Sending And Receiving Faxes Using Ip Address Fax - Konica Minolta bizhub C754 User Manual

10.2

Configuring the IP address fax environment

10.2 Configuring the IP address fax environment

Overview

The IP address fax function is a function used to send and receive faxes within a limited network such as
enterprise network. In addition to IP address, you can also use a host name and E-mail address to specify
the destination.
The SMTP protocol is used to send and receive IP address faxes. Because the SMTP server function of this
machine sends and receives data, no server is required when sending or receiving a fax by specifying the IP
address of the remote machine.
When using the IP address fax function, follow the below procedure to configure the settings.
0 These items must be configured by your service representative in advance. For details, contact your
service representative.
0 The optional Fax Kit is required to use this function.
1
Configure settings for connecting to the network such as setting of the IP address of this machine
% For details on configuring the setting, refer to page 2-2.
2
Configure basic settings for sending and receiving faxes using IP address fax
% For details on configuring the setting, refer to page 10-16.
3
Set the following options according to your environment
Purpose
Change of default compression type setting for transmission in black and white
Change of default compression type setting for transmission in color
Configuring basic settings for sending and receiving faxes using IP address
fax
Enable the IP address fax function. In addition, configure settings for sending and receiving faxes, sender
information of this machine, and operation mode for IP address fax.
1
In the administrator mode, select [Network] - [Network Fax Setting] - [Network Fax Function Settings],
and then set [IP Address Fax Function Settings] to [ON] (Default: [OFF]).
bizhub C754/C654
10
Reference
page 10-20
page 10-20
10-16