Konica Minolta bizhub C754 User Manual page 160

10.1 Configuring the Internet fax environment
Settings
[POP before SMTP Time]
2
Set the POP over SSL and APOP settings according to your environment. In the administrator mode,
select [Network] - [E-mail Setting] - [E-mail RX (POP)], and configure the following settings.
Settings
[APOP Authentication]
[Use SSL/TLS]
[Port No.(SSL)]
[Certificate Verification
Level Settings]
bizhub C754/C654
Description
If necessary, change the waiting time until starting E-mail transmission af-
ter the POP authentication is successful.
Depending on your environment, it may take time before the E-mail trans-
mission is allowed after the POP authentication is successful. In that case,
if a time period that is too short is specified, E-mail transmission may fail.
[5] sec. is specified by default.
Description
If you use APOP in your E-mail server (POP), select [ON].
[OFF] is specified by default.
When using SSL to encrypt a communication with the E-mail server (POP),
select this check box.
[OFF] (not selected) is specified by default.
If necessary, change the SSL communication port number.
Normally, you can use the original port number.
[995] is specified by default.
To verify the certificate, select items to be verified.
If you select [Confirm] at each item, the certificate is verified for each item.
10
10-14