Configurig Basic Settings For The Ntlm Authentication - Konica Minolta bizhub C754 User Manual

12.5 Employing the NTLM authentication

Configurig basic settings for the NTLM authentication

Register your authentication server on this machine. In addition, change the authentication method of this
machine so that authentication is performed using the registered authentication server.
1
In the administrator mode, select [User Auth/Account Track] - [External Server Settings] - [Edit], then
configure the following settings.
Settings
[External Server Name]
[External Server Type]
[Default Domain Name]
bizhub C754/C654
Description
Enter the name of your authentication server (using up to 32 characters).
Assign an easy-to-understand name to the authentication server to be reg-
istered.
Select [NTLM v1] or [NTLM v2].
NTLM v2 is applied on the Windows NT 4.0 (Service Pack 4) and later.
Enter the default domain name of your authentication server (using up to
64 characters). The default domain name cannot be prefixed by an asterisk
(*).
The default domain name must be uppercase letters.
12
12-19