[Smb Settings]; [Client Settings] - Konica Minolta bizhub C754 User Manual

[SMB Settings]

To display: [Utility] - [Administrator Settings] - [Network Settings] - [SMB Settings]
Set the SMB (Server Message Block) operating environment.
Settings

[Client Settings]

[Print Settings]
[WINS Settings]
[Direct Hosting Setting]
[Client Settings]
To display: [Utility] - [Administrator Settings] - [Network Settings] - [SMB Settings] - [Client Settings]
Configure settings to enable use of the SMB client function of this machine.
Settings
[ON]/[OFF]
[SMB Authentication Set-
ting]
[Authentication Setting if
Kerberos Fails]
[User Authentication
(NTLM)]
[DFS Setting]
bizhub C754/C654
Description
Configure settings to enable use of the SMB client function of this machine.
Configure settings to perform SMB printing on this machine.
Register the WINS server when it is installed to resolve the name.
Select whether to enable the direct hosting SMB service. If enabled, a peer
can be specified using the IP address (IPv4 or IPv6) or host name.
Description
Select whether to use the SMB client function of this machine.
Using this function allows you to send the scanned original data to a
shared folder of a computer.
[ON] is specified by default.
Select an authentication method for SMB transmission according to your
environment.
• [NTLM v1]: Performs the NTLM v1 authentication. This option is availa-
ble in the NT domain environment.
• [NTLM v2]: Performs NTLM v2 authentication. This option is available
in the NT domain environment.
• [NTLM v1/v2]: Performs NTLMv1 authentication when NTLMv2 authen-
tication fails. This option is available in the NT domain environment.
• [Kerberos]: Performs Kerberos authentication. This option is available
in the Active Directory domain environment.
[Kerberos] is specified by default.
If [Kerberos] is selected in [SMB Authentication Setting], select whether to
perform NTLM authentication when Kerberos authentication has failed.
• [Enable NTLM v1/v2]: NTLMv2 authentication is performed when Ker-
beros authentication fails, and NTLMv1 authentication is performed
when NTLMv2 authentication fails. This option is available when both
the Active Directory and NT domains are specified.
• [Disable NTLM]: Assumes that authentication fails when Kerberos au-
thentication has failed.
[Disable NTLM] is specified by default.
Select whether to use user authentication via the NTLM server.
[ON] is specified by default.
Select whether to use DFS when the distributed file system (DFS) is in-
stalled.
[OFF] is specified by default.
17
17-13