Using The Pc-Fax Rx Function - Konica Minolta bizhub C754 User Manual

9.3 Specifying useful transmission and reception functions
9.3.6

Using the PC-Fax RX function

PC-Fax RX is a function that automatically saves a received fax to the Compulsory Memory RX User Box or
a user box specified in F-Code (SUB Address).
A stored fax job can be read from the user box into a computer.
Tips
- This function cannot be used together with the following functions.
– Compulsory Memory RX, Forward TX, TSI Routing
- When using two lines, you can select [Fax Settings] - [TX/RX Settings] - [Individual Receiving Line Set-
up] in the administrator mode to enable the PC-Fax RX function for each line.
1
In the administrator mode, select [Fax Settings] - [Function Settings] - [RX Data Operation Settings] -
[Fax RX Settings], then click [OK].
2
When using two lines, select the line for which the PC-Fax RX function is set, and click [Edit].
% When using a single line, go to Step 3.
3
At [PC-Fax RX Setting], configure the following settings.
Settings
[PC-Fax RX Setting]
bizhub C754/C654
Description
Select [Allow] to use the PC-Fax RX function.
[Restrict] is specified by default.
9
9-14