Using The Pop Before Smtp Authentication - Konica Minolta bizhub C754 User Manual

10.1 Configuring the Internet fax environment
Settings
[Authentication Setting]

Using the POP Before SMTP Authentication

Configure the setting if your environment requires the POP Before SMTP Authentication for sending an E-
mail.
The POP Before SMTP authentication is a function that performs POP authentication using the E-mail server
(POP) before sending an E-mail and allows E-mail transmission only when the authentication is successful.
To use the POP Before SMTP authentication, enable the POP Before SMTP on this machine. In addition, con-
figure settings for connecting to the E-mail server (POP) used for authentication.
1
In the administrator mode, select [Network] - [E-mail Setting] - [E-mail TX (SMTP)], and configure the
following settings.
Settings
[POP before SMTP]
bizhub C754/C654
Description
Select whether to synchronize the SMTP authentication with the user au-
thentication of this machine. This item is necessary when the user authen-
tication is installed on this machine.
• [User Authentication]: Uses the user name and password of the regis-
tered user of this machine as [User ID] and [Password] for the SMTP au-
thentication.
• [Set Value]: Uses values entered at [User ID] and [Password].
[Set Value] is specified by default.
Description
Select [ON] to use the POP Before SMTP.
[OFF] is specified by default.
10
10-13