[Device Setting]; [Time Adjustment Setting] - Konica Minolta bizhub C754 User Manual

Settings

[Device Setting]

[Time Adjustment Setting]

[Status Notification Setting]
[Total Counter Notification
Setting]
[PING Confirmation]
[SLP Setting]
[LPD Setting]
[Prefix/Suffix Setting]
[Error Code Display Set-
ting]
[Device Setting]
To display: [Utility] - [Administrator Settings] - [Network Settings] - [Detail Settings] - [Device Setting]
Check the MAC address of this machine, enable or disable LLTD (Link Layer Topology Discovery), and spec-
ify the network speed.
Settings
[MAC Address]
[LLTD Setting]
[Network Speed]
[Time Adjustment Setting]
To display: [Utility] - [Administrator Settings] - [Network Settings] - [Detail Settings] - [Time Adjustment Set-
ting]
Configure settings to automatically adjust the date and time of this machine using the NTP (Network Time
Protocol) server.
Settings
[ON]/[OFF]
[Auto IPv6 Retrieval]
[NTP Server Setting]
[Host Address]
bizhub C754/C654
Description
Check the MAC address of this machine, enable or disable LLTD (Link Lay-
er Topology Discovery), and specify the network speed.
Configure settings to automatically adjust the date and time of this ma-
chine using the NTP (Network Time Protocol) server.
Configure the setting for notifying to the registered E-mail address when a
warning such as for toner replacement or a paper jam occurs on this ma-
chine.
Configure the setting for sending counter information managed by this ma-
chine to a registered E-mail address.
Send a ping to the device communicating with this machine, to check for
proper connection.
Select whether to enable the SLP (Service Location Protocol).
Select whether to enable the LPD (Line Printer Daemon).
Register a prefix and suffix of an E-mail address. Also, configure the setting
for recalling the registered prefix and suffix when entering an E-mail ad-
dress.
Select whether to display network error code on the Touch Panel.
Description
Displays the MAC address of this machine.
Select whether to use LLTD (Link Layer Topology Discovery).
Using LLTD allows you to display this machine on the network map if your
computer is equipped with Windows Vista or later (Windows Vista/7/Server
2008/Server 2008 R2).
[Enable] is specified by default.
Select the network speed according to your environment.
The default is [Auto (10M/100Mbps)].
Description
Select whether to automatically adjust the date and time of this machine
via the NTP server.
[OFF] is specified by default.
In the IPv6 environment, select whether to automatically specify the NTP
server address by DHCPv6.
[On] is specified by default.
Register a discovery proxy server to perform Web service printing or scan-
ning.
Select a number to be registered, and configure the following items.
Enter the NTP server address.
Use one of the following entry formats.
• Example of host name entry: "host.example.com"
• Example of IP address (IPv4) entry: "192.168.1.1"
• Example of IP address (IPv6) entry: "fe80::220:6b.:fe10:2f16"
17
17-28