4.3
Setting the date and time for the machine
2
In the administrator mode, select [Maintenance] - [Date/Time Setting] - [Time Adjustment Setting], then
configure the following settings.
Settings
[Time Adjustment Setting]
[Auto IPv6 Retrieval]
[NTP Server Address]
[Port No.]
[Auto Time Adjustment]
[Polling Interval]
3
Click [Adjust].
Connect to the NTP server, and adjust the date and time of this machine.
bizhub C754/C654
Description
To automatically adjust the date and time of this machine via the NTP serv-
er, select [OFF].
[OFF] is specified by default.
Select [ON] to automatically specify the NTP server address.
In the IPv6 environment, the NTP server address can be automatically
specified by DHCPv6.
[ON] is specified by default.
Enter the NTP server address.
Use one of the following formats.
•
Example of host name entry: "host.example.com"
•
Example of IP address (IPv4) entry: "192.168.1.1"
•
Example of IP address (IPv6) entry: "fe80::220:6bff:fe10:2f16"
If necessary, change the NTP server port number.
Normally, you can use the original port number.
[123] is specified by default.
To periodically adjust the date and time by connecting to the NTP server,
select [ON]. Also, specify an interval for adjusting the date and time at [Poll-
ing Interval].
[OFF] is specified by default.
If you select [ON] for [Auto Time Adjustment], specify an interval to auto-
matically adjust the date and time of this machine (unit: hours).
4
4-5