Manual Trans; Basic Settings - Konica Minolta d-Color MF3000 PF-P08 Service Manual

Field Service Ver. 1.1 Jun. 2010
10.13.7

Manual Trans.

A. Use
• Use when enabling the manual transmission for the CS Remote Care.
• Not displayed in the following cases.
The machine is not registered in the center.
The maintenance is already provided.
B. Procedure
1. Select [Service Mode] [CS Remote Care] [Manual Trans.].
2. Select [Yes], and touch [OK] to start manual transmission.
10.13.8

Basic Settings

A. Center ID
(1) Use
• Registers and checks the Center ID for the CS Remote Care.
(2) Procedure
1. Select [Service Mode] [CS Remote Care] [Basic Settings] [Center ID].
2. Touch [Center ID].
3. Enter the ID number using the software keyboard.
B. Web Server
(1) Use
• Registers and checks the Web Server which is used for communication with the CS
Remote Care.
(2) Procedure
1. Select [Service Mode] [CS Remote Care] [Basic Settings] [Web Server].
2. Touch [Web Server].
3. Enter the server address or domain name using the software keyboard.
C. Encryption
(1) Use
• Sets whether or not to enable encryption for communication with the CS Remote Care.
(2) Procedure
1. Select [Service Mode] [CS Remote Care] [Basic Settings] [Encryption].
2. Select [Yes] or [No], and touch [OK].
D. Comm. Method
(1) Use
• Sets the communication method for the CS Remote Care.
Simplex: One-way communication
Duplex: Two-way communication
(2) Procedure
1. Select [Service Mode] [CS Remote Care] [Basic Settings] [Comm. Method].
2. Select [Simplex] or [Duplex], and touch [OK].
10. SERVICE MODE
165