Specifying The Time To Switch To The Daylight-Saving Time - Konica Minolta bizhub 215 User Manual

2.3 First required registration and setting check
7
Use +, to select the time zone, and press the OK key.
This returns to the User Settings screen.
2.3.4

Specifying the time to switch to the daylight-saving time

1
Press the Utility key.
2
Use +, to select [ADMIN. MANAGEMENT], and press the OK key.
3
Enter the administrator number using the Keypad, and press the OK key.
% The factory default of the administrator number is [000000].
4
Use +, to select [USER SETTING], and press the OK key.
5
Use +, to select [DAYLIGHT SAVING], and press the OK key.
6
Use +, to select [OFF] or [ON], and press the OK key.
% If [ON] is selected, enter the time difference (1 to 150 min.) in the following screen, and press the
OK key.
This returns to the User Settings screen.
Tips
- Use this setting to manually configure the difference between winter time and summer time. The time
system does not automatically switch between winter time and summer time.
bizhub 215
2
2-11