System Specifications; Physical Specifications; Facility Specifications; Power Specifications - HP Designjet 3D User Manual

Hp designjet 3d removal system - user's guide: english
Hide thumbs Also See for Designjet 3D:
Table of Contents

Advertisement

8

System Specifications

Physical specifications

Height
Width
Depth
Weight

Facility specifications

Installation Location
Power Requirements
Drain Requirements
Water Requirements

Power specifications

Source (nominal)

Ecological specifications

This product complies with European Union WEEE and RoHS Directives.
For the up-to-date ecological specifications of your HP Designjet 3D Removal System, please go
to
http://www.hp.com/
18 Chapter 8 System Specifications
43.85 cm (17.25 in.)
48.33 cm (18.24 in.)
43.18 cm (17.00 in.)
16.40 kg (36 lbs.)
Stable level surface capable of holding 36 kg (80 lbs.)
A grounded electrical outlet (220–240V~ 9A 50 Hz 1200W)
located within 2 M (5 ft.) of the system.
Do not use an extension cord or a power strip, using these can
possibly cause intermittent power issues.
The system must be located at least 20 cm (8 in.) higher than the
wastewater drain.
The drain facility must accept a drain pH level between 6.5 and
10.0.
The drain must accept a wastewater temperature of at least 75°C
(167°F).
A connection to a water source with a 3/4 in. hose thread.
The water source temperature should be ≥15°C (59°F).
The water pressure must be between 0.5 bars and 10 bars (7.25 psi
and 145 psi).
The water source hardness should be ≤300 ppm.
220–240V~ 9A 50 Hz 1200W
and search for "ecological specifications".

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Designjet 3d removal system

Table of Contents