Stepping Motor (Hopping) - Oki OKIFAX 5750 Service Manual

Service Guide OKIFAX 5750/5950 Page: 329
Chapter D Second Paper Feeder

3.3.1 Stepping motor (Hopping)

(1) Turn the facsimile power switch off, pull out the AC cord from the outlet. Remove the facsimile off Second Paper Feeder.
(2) Take the paper cassette assy (1) out of Second Paper Feeder.
(3) Remove six screws (2) and remove the upper plate (3). Remove two screws (5) and remove the hopping frame assy (6).
(4) Remove the front cover assy (4) off the guide boss on the guide L (2nd) assy (7) by bending the guide L (2nd) assy (7) in the direction of arrow shown in the
magnified view below.
(5) Pull the sheet guide assy (8) in the direction of arrow a and also push in the direction of arrow b to unlock the notch, and bring the sheet guide assy (8) in the
direction of arrow c to remove the sheet guide assy (8).