Cleaning The Platen - Gerber EDGE FX Owner's Manual

Bail arm
Bail arm
squeegees (2)
Sprockets
Wipe the sprockets with ThermApprove cleaning cards or a clean, lint-free cloth moistened
with 99% isopropyl alcohol. Allow the sprockets to air dry before loading material. Refer to the
photo to locate the areas to clean.
Note: Isopropyl alcohol may discolor the squeegees over time. Discoloring does not affect the
operation of the squeegees.

Cleaning the platen

Wipe the platen to remove any debris with ThermApprove cleaning cards or a clean, lint-free
cloth moistened with 99% isopropyl alcohol. Allow to air dry before loading material. Refer to
the following photo to locate the areas to clean.
Sprockets
Platen
Sprockets
87