Gerber EDGE FX Owner's Manual page 85

To run the TPH Power test
1 Open the GERBER EDGE FX web interface by entering the printer's IP address in the
Location or Address line of your web browser (for example: http://169.254.128.129).
The Welcome to GERBER EDGE FX screen displays.
2 Click the Diagnostics link to open the GERBER EDGE FX Diagnostics page.
3 Click the Input/Output link to open the Input/Output Diagnostics page.
4 Click TPH Power to open the Print Head Power Supply Diagnostics page.
5 Click Power Supply ON to activate the power supply or Power Supply OFF to turn it
off. The state of the TPH power supply (ON/OFF) displays in the window.
6 Click Done Testing to return to the EDGE FX Diagnostics page.
79