Gerber EDGE FX Owner's Manual page 84

78 CHAPTER 7
Troubleshooting
To run the Digital Input test
1 Open the GERBER EDGE FX web interface by entering the printer's IP address in the
Location or Address line of your web browser (for example: http://169.254.128.129).
The Welcome to GERBER EDGE FX screen displays.
2 Click the Diagnostics link to open the GERBER EDGE FX Diagnostics page.
3 Click the Input/Output link to open the Input/Output Diagnostics page.
4 Click Digital Input to read the digital signals going into the GERBER EDGE FX and
display the results on the Digital Inputs page
5 Click Done to return to the GERBER EDGE FX Diagnostics page.