Internal Tests - Gerber EDGE FX Owner's Manual

72 CHAPTER 7
Troubleshooting

Internal Tests

The Diagnostics web page also provides the following internal tests that are used in conjunction
with GSP technical support to verify printer operation:
♦ RFID (Radio Frequency Identification)
♦ Input/Output
♦ View Log
♦ Keypad
♦ Burn-In
♦ Display
♦ Statistics
Running the RFID test
The RFID test checks the operation of the RFID cassette tag system. You must have a foil
cassette installed in the printer to perform the tests. There are two tests available:
♦ Read Only Test which tests that the printer can read the data on the RFID cassette tag.
♦ Read/Write Test which tests the ability to read and update the data on the RFID
cassette tag.
After running an RFID test, the RFID Test Results page displays and is updated every five
seconds until you click the Stop Test button in the RFID Test Results window.
CAUTION: When performing the Read/Write test, an attempt is made to return the
RFID tag data to its pre-test state. If this is unsuccessful the RFID tag may no longer
be useable after the test. If the RFID tag becomes unusable the printer displays
"Not Gerber Foil" when the foil cartridge is inserted. You can still use the foil, but
the foil name and remaining length is no longer tracked.