Changing The Foil Display/Speed - Gerber EDGE FX Owner's Manual

Changing the Foil Display/Speed

You can alter the rate that foil messages alternate, and whether to display the foil name only, or
the foil name and the length on the GERBER EDGE FX LCD. The available settings are:
♦ Name Only (Slow)
♦ Name Only (Medium)
♦ Name Only (Fast)
♦ Name and Length (Slow)
♦ Name and Length (Medium) default setting
♦ Name and Length (Fast)
To change the foil display/speed
1 Open the GERBER EDGE FX web interface by entering the printer's IP address in the
Location or Address line of your web browser (for example: http://169.254.128.129).
The Welcome to GERBER EDGE FX screen displays.
2 Click the System Settings link to open the System Settings page.
3 Choose a Foil Display/Speed setting from the drop-down list. (The default is Name
and Length (Medium).)
4 Click Change Settings to apply the new Foil Display Speed.
53