Gerber EDGE FX Owner's Manual page 79

To run the RFID test
1 Open the GERBER EDGE FX web interface by double clicking the icon on the desk top
or the printer's IP address in the Location or Address line of your web browser (for
example: http://169.254.128.129). The Welcome to GERBER EDGE FX screen displays.
2 Click the Diagnostics link to open the GERBER EDGE FX Diagnostics page.
3 Click the RFID link to open the RFID Tag Diagnostics page.
4 Click either the Read Only Test or the Read/Write Test to perform that test. The RFID
Test Results page displays and updates every five seconds.
5 Click Stop Test to end the test and return to the RFID Tag Diagnostics window. Click
Done Testing to return to the Home page.
73