Assembling And Disassembling The Edge Fx Foil Cartridge - Gerber EDGE FX Owner's Manual

Assembling and disassembling the EDGE FX Foil
Cartridge
The EDGE FX Foil Cartridge Assembly consists of an EDGE FX Foil Caddy, a removable Foil
Insert with an RFID identifier label, and a Foil ID Card. Foil Inserts are easily installed or
removed from the Foil Caddy as required. After installing Foil Inserts, retain the Foil Blister
Packages to store your foil when it is not loaded in the Foil Caddy.
Foil Blister Package
To assemble the EDGE FX Foil Cartridge
1 Depress the latches on either side of the Foil Caddy and open the lid 180º until it lies
flat on a table or counter.
2 Open the Foil Blister Package that contains the Foil Insert. Set the Blister Package on
the table beside the Foil Caddy (lids facing away).
3 Remove the Foil ID Card from the Foil Blister Package and insert it in the slot on the
front of the Foil Caddy so that the foil name is visible from the outside.
Foil Caddy
29