Gerber EDGE FX Owner's Manual page 82

76 CHAPTER 7
Troubleshooting
To run the TPH Fans test
1 Open the GERBER EDGE FX web interface by entering the printer's IP address in the
Location or Address line of your web browser (for example: http://169.254.128.129).
The Welcome to GERBER EDGE FX screen displays.
2 Click the Diagnostics link to open the GERBER EDGE FX Diagnostics page.
3 Click the Input/Output link to open the Input/Output Diagnostics page.
4 Click TPH Fans to open the Print Head Fan Diagnostics web page.
5 Click Head Fans ON to activate the printer's fans.
6 Click Head Fans OFF to turn the printer's fans off. The results of the voltage test and
the state of the fan (ON/OFF) display in the window.
7 Click Done Testing to return to the EDGE FX Diagnostics page.