Table of Contents
Advertisement
20
CHAPTER 2
Installing the GERBER EDGE FX
To set the IP Address and Network Mask for Windows XP
1 Click Start > Control Panel.
2 Click Network and Internet Connections.
3 Click the Network Connections icon.
4 Right click the Local Area Connections icon and choose Properties to open the Local
Area Connections Properties dialog box.
5 Click Internet Protocol (TCP/IP) in the list.
6 Click Properties to open the Internet Protocol (TCP/IP) Properties dialog box.
Note: Depending on your network and other equipment currently residing on the network,
your computer's IP address may vary. If necessary, replace the network address in this
procedure with the proper address obtained from your network administrator or IT
professional.
7 Click Use the following IP address:
8 Enter 169.254.128.130 for IP Address.
Hide quick links:
Advertisement
Table of Contents
