Removing The Main Pcb Assy And The Mechanical Printing Unit - Brother PT-9200PC Service Manual

7] Removing the Main PCB Assy and the Mechanical Printing Unit

[
(1) Unplug the following connectors and cables.
Caution 1: Be sure to unlock the connector before removing the head
Caution 2: Take care not to damage the connectors and cables.
Sensor PCB harness (P3)
Sub PCB harness (P2)
Head flexible cable (P9)
Connector to be unlocked
flexible cable.
Half cutter sensor connector (P8)
Fig. 2.2-14 Removing the Connectors and Cables
Tape end sensor
connector (P4)
Full cutter motor
connector (P5)
Power supply
connector (P1)
Half cutter motor
connector (P6)
II - 18
Full cutter sensor connector (P7)
Tape feed motor connector (P10)
Body cover
Main PCB assy