Management; Remote Management - NETGEAR WNAP210 - ProSafe Wireless-N - Wireless Access Point Reference Manual

This chapter describes how to use the management and monitoring features of your ProSafe
Wireless-N Access Point. To access these features, connect to the WNAP210 access point as
described in "Logging In Using the Default IP Address" on page
Maintenance or Monitoring in the main menu of the browser interface.

Remote Management

Both the SNMP and Remote Console are enabled by default, which allows for remote
management of the WNAP210 from a client running SNMP management software, as well as
from a secure Telnet console.
To set up an SNMP management interface:
1. Select Maintenance > Remote Management > SNMP. The SNMP screen displays, as shown
in Figure 3-1.
Figure 3-1
v1.0 March 2009
Chapter 3

Management

2-11. Then select the
3-1