The Web browser used to upload new firmware into the WNAP210 must support HTTP uploads,
such as Microsoft Internet Explorer 6.0 or above, or Netscape Navigator 4.78 or above.
Figure 3-4
To upgrade the WNAP210 firmware:
1. Download the new software file from the NETGEAR website, save it to your hard disk, and
unzip it.
2. Select Maintenance > Upgrade > Firmware Upgrade. The Firmware Upgrade screen
displays as shown in
3. Click Browse and browse to the location of the image (.rmg) upgrade file.
4. Click Apply.
When the upload is completed, your wireless access point automatically restarts. The upgrade
process typically takes at least 3 minutes.
Managing the Configuration File
The WNAP210 Wireless Access Point settings are stored in the wireless access point in a
configuration file. This file can be saved (backed up) to a user's computer, retrieved (restored)
from the user's computer, or reset to factory default settings.
The Configuration Backup/Restore Settings menu allows you to save or retrieve a file containing
your wireless access point's configuration settings.
Management
ProSafe Wireless-N Access Point WNAP210 Reference Manual
Figure
3-4.
v1.0 March 2009
3-5