NETGEAR WNAP210 - ProSafe Wireless-N - Wireless Access Point Reference Manual page 120

ProSafe Wireless-N Access Point WNAP210 Reference Manual
| | |-management-vlan
| | |-untagged-vlan
| | |-untagged-vlan-status
| |
|
|-exit
|-file
|-firmware-upgrade
|-password
|-restore-configuration
|-restore-default-password
|-show>
| |-configuration
| |-interface>
| | |-eth>
| | | |-statistics
| | |
| | |-wlan>
| | | |-2.4GHz>
| | | | |-configuration
| | | | |-knownaplist
| | | | |-stationlist
| | | | |-statistics
| | | | |-trusted-stationlist
| | | | |-unknownaplist
| | | |
| | |
| |
| |-log
| |-system
C-8
--vlan management id
--untagged vlan id
--untagged vlan status
--logout from CLI
--
--upload new system firmware file
--system password
--restore system configuration
--restore default system password
--show system settings
--show system configuration
--show wireless lan interface
--ethernet interface
--show ethernet statistics
--wlan interface settings
--2.4GHz wlan interface settings
--interface configuration
--known access point list
--station list
--interface statistics
--trusted station list
--unknown access point list
--system log
--system setting
v1.0 March 2009
Command Line Reference