NETGEAR WNAP210 - ProSafe Wireless-N - Wireless Access Point Reference Manual page 39

Figure 2-10
2. Specfy the Wireless LAN settings based on the following field descriptions:
• Wireless Mode. Select the wireless operating mode you want to use. The default is 11ng.
The options are:
– 11b. All 802.11b wireless stations can be used. (The 802.11g wireless stations can still
be used if they can operate in 802.11b mode.)
Note: If you select this option and if other settings on this screen are
– 11bg. Both 802.11b and 802.11g wireless stations can be used.
– 11ng. All 11b, 11g, and 11ng wireless stations can be used. This is the default. If you
select this option, then two additional options, Channel Width and Guard Interval,
display.
• Turn Radio On. On by default. You can also turn off the radio to disable access through
this device. This can be helpful for configuration, network tuning, or troubleshooting
activities.
Installation and Configuration
ProSafe Wireless-N Access Point WNAP210 Reference Manual
disabled, then you must select the Turn Radio On check box to
enable available options on this screen.
v1.0 March 2009
2-17