NETGEAR WNAP210 - ProSafe Wireless-N - Wireless Access Point Reference Manual page 121

Numerics
11b/g/Next
default mode 2-9
192.168.0.210, Static IP Address
192.168.0.230, default address
255.255.255.0
default subnet 2-4
802.11a default name 2-11
802.11a/g 1-4
802.11b/g default name 2-11
802.1Q VLAN 1-2
A
Access Controll screens 2-41
Access Point name, default
ACK 1-4
Activity Log 3-11
Advailable Wireless Stations
Advanced Access Point Settings screens
Advanced screens of Wireless Settings
AES 2-35, 2-38
WPA2-PSK, use with 2-38
Aggregation Length
default settings 4-6
AMPDU
default settings 4-6
AP EDCA parameters 4-7
Auto Uplink 1-4, 1-5
B
Band selection 1-3
2-4
2-4
2-5
2-41
4-9
4-4
v1.0 March 2009
Basic Settings menu 2-6
Beacon Interval
default setting 4-6
Broadcast SSID 2-10
Broadcast Wireless Network Name
Broadcast Wireless Network Name (SSID)
Broadcast Wireless Network Name. See SSID
BSSID 1-2
C
Carrier Sense Multiple Access with Collision Detection.
See CSMA/CD 4-5
Category 5 Ethernet cable 1-6
Change Password screen 3-9
Channel Width 2-19
Channel/Frequency 2-10, 2-18, 2-20
channel/frequency
default Australia 2-10
default Canada 2-10
default Europe 2-10
default US 2-10
CLI
command set 3-4
command sets C-1
Client Mode 3-1, 3-16
configuration
erasing 3-8
restore 3-5
configuration file
backup and restore settings
retrieving 3-7, 3-8
saving 3-6, 3-7
configure the RangeMax NEXT
Country/Region 2-5
Index
2-10
2-18, 2-23
3-5
2-3
Index-1