Importing A Rogue Ap List From A File - NETGEAR WNAP210 - ProSafe Wireless-N - Wireless Access Point Reference Manual

Figure 3-14
2. Click Refresh to discover the APs. See
for more information.
3. Click Move to add APs in the Unknown AP List to the Known AP List.
4. Click Delete to remove APs from the Known AP List back to the Unknown AP List.
5. Select the Turn Rogue AP Detection On check box to enable rogue AP detection, and click
Apply.
If you enable rogue AP detection, the AP continuously scans the wireless network and collects
information about all APs heard on its channel.

Importing a Rogue AP List from a File

You can import the Known AP List from a file.
To replace the existing AP list:
1. Select the Replace radio button to replace the existing list of known APs, or select Merge to
add the new MAC addresses to the existing list.
2. Click Browse, and navigate to the location of the file containing the device list.
3. Select the file, and click Open.
Management
ProSafe Wireless-N Access Point WNAP210 Reference Manual
"Importing Rogue AP List from a File" on page 3-17
v1.0 March 2009
3-17