Using Activity Log Information - NETGEAR WNAP210 - ProSafe Wireless-N - Wireless Access Point Reference Manual

ProSafe Wireless-N Access Point WNAP210 Reference Manual
Figure 3-9
2. Enable Syslog. Enable this option if you have a syslog server on your LAN. If this feature is
enabled, you must enter the IP address of your syslog server and the port number your SysLog
server is configured to use. The default is disabled.
3. Syslog Server IP Address.The access point will send all the syslog file to the specified IP
address if syslog option is enabled. The default is 0.0.0.0.
4. Port Number. The port number configured in the syslog server on your LAN. The default is
514.
5. Click Apply to save your syslog settings.

Using Activity Log Information

The Activity Log screen displays the access point system activity.
1. Select Monitoring > Logs. The Logs screen displays as shown in
3-10
v1.0 March 2009
Figure 3-10.
Management