Configuring A Point-To-Multi-Point Wireless Bridge - NETGEAR WNAP210 - ProSafe Wireless-N - Wireless Access Point Reference Manual

5. Verify connectivity across the LAN 1 and LAN 2.
A computer on either LAN segment should be able to connect to the Internet or share files and
printers of any other PCs or servers connected to LAN Segment 1 or LAN Segment 2.
6. Click Apply to save your settings.

Configuring a Point-to-Multi-Point Wireless Bridge

To configure a point-to-multi-point wireless bridge as shown in
1. Select Configuration > Wireless Bridge > Bridging and Repeating. The Bridging and
Repeating screen displays.
Figure 4-8
Advanced Configuration
ProSafe Wireless-N Access Point WNAP210 Reference Manual
v1.0 March 2009
Figure 4-8:
4-13