Use the procedures described in the following sections to configure the WNAP210. Store this
information in a safe place.
Configuring the RADIUS Server Settings
You can set p or modify the RADIUS server settings to compliment network authentication
security options. The RADIUS server must be used with Legacy 802.1x, and can be used with
WPA and WPA2 network authentication. When using a RADIUS server, the RADIUS server
settings before completing the network authentication security profile (see
with RADIUS" on page
WPA and WPA2 with RADIUS" on page 2-36
options).
Note: The RADIUS server settings apply to all profiles. They o need to be configured
only once per wireless access point.
To set up or modify the RADIUS server settings:
1. From your Web browser, log in to the WNAP210 using the default LAN address of
http://192.168.0.236, user name admin, and password password, or use the LAN address and
password that you set up.
2. Select Configuration > Security > Advanced > RADIUS Server Settings. The RADIUS
Server Settings screen displays, as shown in
Installation and Configuration
ProSafe Wireless-N Access Point WNAP210 Reference Manual
2-33,
"Configuring WPA2 with RADIUS" on page
v1.0 March 2009
for specifics on implementing these security
Figure
2-13.
"Configuring WPA
2-35, or
"Configuring
2-27