NETGEAR WNAP210 - ProSafe Wireless-N - Wireless Access Point Reference Manual page 47

Passphrases and Keys are used in the following ways:
– Passphrase. To use the passphrase to generate the WEP keys, enter a passphrase and
click the Generate Keys button. You can also enter the keys directly. These keys must
match the other wireless stations.
– Key 1, Key 2, Key 3, Key 4. If you are using WEP, select the key to be used as the
default key. Data transmissions are always encrypted using the default key. The other
keys be used only to decrypt received data.
– WPA Preshared Key Passphrase. If you are using WPA-PSK, enter the passphrase
here. All wireless stations must use the same passphrase (network key). The network
key must be from 8 to 64 characters in length.
• Wireless Client Security Separation. If this feature is enabled, the associated wireless
clients will not be able to communicate with each other. (This feature is intended for
hotspots and other public access situations.) The default is No.
• VLAN ID. If the hubs/switches on your LAN support the VLAN (802.1Q) standard and
this feature has been enabled, the default VLAN ID for WNAP210 will be associated with
each profile. The default profile VLAN ID must match the IDs used by other network
devices.
Installation and Configuration
ProSafe Wireless-N Access Point WNAP210 Reference Manual
v1.0 March 2009
2-25