NETGEAR WNAP210 - ProSafe Wireless-N - Wireless Access Point Reference Manual page 50

ProSafe Wireless-N Access Point WNAP210 Reference Manual
Figure 2-13
3. Enter the following RADIUS server settings:
• Authentication Server. This configuration is required for authentication using a RADIUS
server.The IP address, port number, and shared secret are required for communication with
the primary RADIUS server. You can also configure a secondary RADIUS server to use, if
the primary RADIUS server fails.
– IP Address. The IP address of the RADIUS server. The default is 0.0.0.0.
– Port. The port number of the RADIUS server. The default is 1812.
– Shared Secret. This is shared between the wireless access point and the RADIUS
server when the supplicant (wireless client) is authenticated.
• Accounting Server. This configuration is required for accounting using a RADIUS
server. The IP address, port number, and shared secret are required for communication
with the primary RADIUS server. You can also configure a secondary RADIUS server to
use if the primary RADIUS server fails.
– IP Address. The IP address of the RADIUS server. The default is 0.0.0.0
– Port. Port number of the RADIUS server. The default: 1813
– Shared Secret. This is shared between the wireless access point and the RADIUS
server while authenticating the supplicant (wireless client).
4. Click Apply to save your settings.
2-28
v1.0 March 2009
Installation and Configuration