NETGEAR WNAP210 - ProSafe Wireless-N - Wireless Access Point Reference Manual page 67

Figure 3-2
4. Click Apply.
Management Using Telnet
1. Open a secure Telnet session from your computer to the access point. The screen shown in
Figure 3-3 should display.
Figure 3-3
2. Enter the login name and password (admin and password are the defaults).
After successful login, the <
the prompt is netgear334408.
3. Enter the desired CLI commands. You can enter
Management
ProSafe Wireless-N Access Point WNAP210 Reference Manual
Access Point Name
help
v1.0 March 2009
> prompt should appear. In this example,
to display the CLI command help.
3-3