NETGEAR WNAP210 - ProSafe Wireless-N - Wireless Access Point Reference Manual page 56

ProSafe Wireless-N Access Point WNAP210 Reference Manual
4. Select Security Profile Settings. The screen for the profile settings you selected displays.
When the Security Profile screen displays, check the radio button of the security profile you
want to modify, and click Edit.
Figure 2-17
5. Select WPA with RADIUS from the from the Network Authentication drop-down list. Data
Encryption will be set to TKIP by default.
6. Wireless Client Security Separation is set to No (disabled) by default. If this feature is
enabled, associated wireless clients will not be able to communicate with each other. (This
feature is intended for hotspots and other public access situations.
7. Click Apply to save your settings.
2-34
v1.0 March 2009
Installation and Configuration