NETGEAR WNAP210 - ProSafe Wireless-N - Wireless Access Point Reference Manual page 28

ProSafe Wireless-N Access Point WNAP210 Reference Manual
This unique name is the access point NetBIOS name. The access point name is printed on the
rear label of the access point. The default is netgearxxxxxx, where xxxxxxx represents the last
6 digits of the access point MAC address. You can replace the default name with a unique
name up to 15 characters long.
5. From the Country/Region drop-down menu, select the region where the access point will be
used (the Country/Region is not Configurable in the United States; but is configurable in the
rest of the world). Click Apply.
Note: If your country or region is not listed, please check with NETGEAR Support.
6. Select System > Basic > Time.
Figure 2-4
• Time Zone. From the drop-down list, select the local time zone for your wireless access
point from a list of all available time zones. The default is USA-Pacific. The wireless
access point will get the current time from the connecting PC.
2-6
v1.0 March 2009
Installation and Configuration