NETGEAR WNAP210 - ProSafe Wireless-N - Wireless Access Point Reference Manual page 29
Wireless-n access point
Hide thumbs
Also See for WNAP210 - ProSafe Wireless-N - Wireless Access Point:
- User manual (82 pages) ,
- Installation manual (2 pages)
Table of Contents
Advertisement
•
NTP Client. Enable the NTP client to synchronize the time of the access point with an
NTP server. The default is Enable.
Note: You must have an Internet connection to get the current time using an NTP
client.
–
Use Custom NTP Server. Select this check box if you have a custom NTP server. The
default is not selected.
–
Hostname / IP Address. Enter the host name or the IP address of the custom NTP server.
The default is time-b.netgear.com.
7. Click Apply.
8. Select Configuration > IP to display IP Settings.
Figure 2-5
9. Fill in the IP address fields of the access point. (See the online help for more information about
how to specify the settings on this screen).
Installation and Configuration
ProSafe Wireless-N Access Point WNAP210 Reference Manual
v1.0 March 2009
2-7
Advertisement
Table of Contents
