NETGEAR WNAP210 - ProSafe Wireless-N - Wireless Access Point Reference Manual page 53

• For information on how to configure WEP encryption for Open Systems or Shared Key,
see "Configuring WEP" on page
• For information on how to configure WPA with RADIUS, see
RADIUS" on page
• For information on how to configure WPA2 with RADIUS, see
RADIUS" on page
• For information on how to configure WPA and WPA2 with RADIUS, see
WPA and WPA2 with RADIUS" on page
• For information on how to configure WPA-PSK, see
page 2-37.
• For information on how to o configure WPA2-PSK, see
page 2-38.
• For information on how to configure WPA-PSK and WPA2-PSK, see
PSK and WPA2-PSK" on page
8. Wireless Client Security Separation is set to No (disabled) by default. If this feature is
enabled, the associated wireless clients will not be able to communicate with each other.
9. If the hubs and switches on your LAN support the VLAN (802.1Q) standard and this feature
has been enabled, the default VLAN ID for WNAP210 will be associated with each profile.
The default Profile VLAN ID must match the IDs used by other network devices.
10. Click Apply to save your Security Profile settings.
11. Click Back. Your new settings will appear in the Security Profiles table identified by the
profile name of the profile. A VLAN ID will also be assigned to your profile.
Note: Security profiles that share the same type of network authentication need not
share the same passphrase or keys. Security profiles that use WEP must share
the same four keys, but they do not need to use the same default key.
To enable your security profile:
1. Select the check box in the Enable column next to your profile.
2. Click Apply. Your security profile is enabled. If you enabled VLAN 802.1Q, your VLAN
profile is enabled. (See
enable VLAN 802.1Q.)
Installation and Configuration
ProSafe Wireless-N Access Point WNAP210 Reference Manual
2-32.
2-33.
2-35.
2-39.
"Setting Basic IP Options" on page 2-15
v1.0 March 2009
"Configuring WPA with
2-36.
"Configuring WPA-PSK" on
"Configuring WPA2-PSK" on
for information on how to
"Configuring WPA2 with
"Configuring
"Configuring WPA-
2-31