Wireless Settings; Configuring 802.11B/G/N Wireless Settings - NETGEAR WNAP210 - ProSafe Wireless-N - Wireless Access Point Reference Manual

ProSafe Wireless-N Access Point WNAP210 Reference Manual
– IP Subnet Mask. The access point will automatically calculate the subnet mask based on
the IP address that you assign. Otherwise, you can use 255.255.255.0 (the default) as the
subnet mask.
– Default Gateway. Enter the IP address of the gateway for your LAN. For more complex
networks, enter the address of the router for the network segment to which the wireless
access point is connected. The default is 0.0.0.0.
– Primary DNS Servers. The access point will use this IP address as the primary Domain
Name Server used by stations on your LAN. The default is 0.0.0.0.
– Secondary DNS Servers. The access point will use this IP address as the secondary
Domain Name Server used by stations on your LAN. The default is 0.0.0.0.
3. Click Apply to save your basic IP settings.

Wireless Settings

The following sections describe how to configure the wireless settings.

Configuring 802.11b/g/n Wireless Settings

To configure the wireless settings of your 802.11 b/g/n wireless access point:
1. Select Configuration > Wireless. The Wireless Settings screen displays, as shown in
Figure 2-10.
2-16
v1.0 March 2009
Installation and Configuration