NETGEAR WNAP210 - ProSafe Wireless-N - Wireless Access Point Reference Manual page 106
Wireless-n access point
Hide thumbs
Also See for WNAP210 - ProSafe Wireless-N - Wireless Access Point:
- User manual (82 pages) ,
- Installation manual (2 pages)
Table of Contents
Advertisement
ProSafe Wireless-N Access Point WNAP210 Reference Manual
Using the Restore Factory Settings Button to Restore
Default Settings
The Restore factory settings button (see
•
Reboot. When this button is pressed and released quickly, the WNAP210 reboots (restarts).
•
Reset to factory defaults. This button can also be used to clear all data and restore all settings
to the factory default values.
To clear all data and restore the factory default values:
1. Power off the WNAP210, and power it back on.
2. Use something with a small point, such as a pen, to press the restore settings button in and hold
it in for at least 5 seconds.
3. Release the restore settings button.
The factory default configuration has now been restored, and the WNAP210 is ready for use.
5-4
"Rear Panel" on page
v1.0 March 2009
1-7) has two functions:
Troubleshooting and Debugging
Advertisement
Table of Contents
