Configuring Wpa2 With Radius - NETGEAR WNAP210 - ProSafe Wireless-N - Wireless Access Point Reference Manual

Configuring WPA2 with RADIUS

Not all wireless adapters support WPA2. Furthermore, client software is required on the client.
Make sure your client card supports WPA2. Consult the product document for your wireless
adapter and WPA2 client software for instructions on configuring WPA2 settings.
Figure 2-18
To configure WPA2 with RADIUS:
1. Select Configuration > Security >Advanced > RADIUS Server Settings. The RADIUS
Server Settings screen displays.
2. Enter the RADIUS settings as shown in
page 2-27.
3. Click Apply to save your RADIUS settings.
4. Select Security Profile Settings. The screen for the profile settings you selected will display.
When the Security Profile screen displays, select the radio button of the security profile you
want to modify, and click Edit.
5. From the Network Authentication drop-down list, select WPA2 with RADIUS from the list.
By default, Data Encryption will be set to AES.
6. Wireless Client Security Separation is set to No (disabled) by default. If this feature is
enabled, associated wireless clients will not be able to communicate with each other. (This
feature is intended for hotspots and other public access situations.)
7. Click Apply to save your settings.
Installation and Configuration
ProSafe Wireless-N Access Point WNAP210 Reference Manual
"Configuring the RADIUS Server Settings" on
v1.0 March 2009
2-35