NETGEAR WNAP210 - ProSafe Wireless-N - Wireless Access Point Reference Manual page 52

ProSafe Wireless-N Access Point WNAP210 Reference Manual
To configure a security profile:
1. From your Web browser, log in to the access point using the default LAN address of 
http://192.168.0.236, user name admin, and password password, or use the LAN address and
password that you set up.
2. Select Configuration > Security > Profile Settings. The profile settings you selected will
display as shown in
3. Select the radio button of the profile you want to modify and click Edit. The Edit Security
Profile screen for the selected profile displays.
Figure 2-15
4. Give your profile a meaningful name so that you can remember it later.
5. The wireless network name (SSID) is set by default to identify it as NETGEAR_11ng.
6. Enable or disable the broadcast wireless network name (SSID). It is enabled by default. (If it is
broadcast, it can be easily detected by other clients.)
7. From the drop-down list shown in
want to use for this profile:
2-30
Figure 2-14.
Figure 2-15, select the network authentication type you
v1.0 March 2009
Installation and Configuration