Enable Or Disable Band Steering With 802.11K Rrm And 802.11V Wifi Network Management - NETGEAR WAX610 User Manual

Insight Managed WiFi 6 AX1800 Dual Band Access Point WAX610 User Manual
The Dashboard page displays.
4. Select Management > Configuration > Wireless > Basic.
The page that displays lets you select an SSID.
5. Click the > button to the left of the SSID.
The settings for the selected SSID display.
6. Click the > Advanced tab.
The page expands.
7. Under Client Isolation, select one of the following radio buttons:
• Disable. Client isolation is disabled for the WiFi network. This is the default setting.
• Enable. Client isolation is enabled for the WiFi network.
If the management VLAN and WiFi network VLAN are identical (by default, both
are VLAN 1) and you enable client isolation, the Allow Access to AP UI check
box displays. By default, this check box is selected, allowing an admin user to
access the local browser UI over WiFi. If you clear the Allow Access to AP UI, an
admin user cannot access the local browser UI over WiFi.
Note: If the management VLAN and WiFi network VLAN are identical (which
they are by default), an admin user can always access the local browser UI over
a wired network connection.
8. Click the Apply button.
Your settings are saved.
Enable or disable band steering with 802.11k
RRM and 802.11v WiFi network management
Band steering lets the access point identify the WiFi devices that are dual-band capable
and steer those devices to the 2.4 GHz or 5 GHz band of a WiFi network (SSID or VAP).
Compared to the 2.4 GHz band, generally more channels and bandwidth are available
in the 5 GHz band, causing less interference and allowing for a better user experience.
Band steering includes 802.11k radio resource management (RRM) and 802.11v WiFi
network management. By default, band steering is disabled.
Manage the Basic WiFi Features 67 User Manual