Factory Default Settings - NETGEAR WNAP210 - ProSafe Wireless-N - Wireless Access Point Reference Manual
Wireless-n access point
Hide thumbs
Also See for WNAP210 - ProSafe Wireless-N - Wireless Access Point:
- User manual (82 pages) ,
- Installation manual (2 pages)
Table of Contents
Advertisement
Default Settings and Technical Specifications
This appendix provides the factory default settings and technical specifications for the ProSafe
Wireless-N Access Point.
Factory Default Settings
You can use the restore settings button located on the rear of your device to reset all settings to
their factory defaults. This is called a hard reset.
•
To perform a hard reset, push and hold the restore settings button for approximately 5 seconds
(until the Test LED blinks rapidly). Your device will return to the factory configuration
settings shown in
•
Pressing the restoresettings button for a shorter period of time simply causes your device to
reboot.
Table A-1. Access Point Default Configuration Settings
Feature
AP Login
User Login URL
User Name (case-sensitive)
Login Password (case-sensitive)
Ethernet Connection
Static IP Address
Ethernet MAC Address
Port Speed
Local Network (LAN)
Table
A-1.
v1.0 March 2009
Description
192.168.0.236
admin
password
192.168.0.210
See bottom label.
10/100/1000
Appendix A
A-1
Advertisement
Table of Contents
